The Proteus® Software on MS Windows® (2000 and XP Professional)
includes everything you need to carry out a measurement and evaluate
the resulting data autonomously. The combination of easy-to-understand
menus and automated routines constitutes a tool that is extremely
user-friendly while allowing sophisticated analyses.
The Proteus® Software is licensed with the instrument and
can of course be installed on other computer systems.
The Proteus® Software in the basic edition contains already
all function criteria that are expected of modern measuring and
evaluation software for all methods of Thermal Analysis of today.
For advanced measuring and evaluation methods different additional
software packages are available.Macro recorder
For automatic evaluation of test series on specified criteria
and definable messages, e.g. for deviation of results (standard
for instruments with automatic sample changer like DSC-ASC
and TG-ASC)
TM-DSC
Programming and Evaluation of temperature modulated DSC tests
with the DSC 204 F1 Phoenix® with unique FRC correction.
BeFlat®
Correction of temperature and heating rates dependent base
line deviations with the DSC 204 F1 Phoenix® over a
multidimensional polynomial function to achieve highest
base line stability with
minimal curve in wide temperature ranges.
Specific Heat, cp
At all DSC systems and also at the “real” TG-DSC
systems in our STA instruments the heat flow calibration
for determination of the temperature depending calorimetric
sensitivity
is enabled. Therefore, the fast and exact determination
of the specific heat of solids, powders and liquids after
standardized
methods (DIN 51007, ASTM E 1269 and ISO 11357) with our
DSC and STA instrument are very easy.
SuperRes® (RCM, RCS)
The software extension for measurements with rate controlled
temperature behavior (mass changing controlled TG
(RCM), rate controlled shrinking Dilatometry (RCS)) has proved
its efficiency
to increase the resolution especially at superposed
processes and to increase the sample compression
in
sintering processes.
c-DTA®
At measuring systems with only one thermocouple on
the sample, like in thermo balances and dilatometers,
by
means of c-DTA
Software information about endothermal and exothermal
processes additionally
to the signals of mass and dimension changes can
be achieved without any hardware extension.
